Out of stock
The revolutionary TOYOTOMI Laser Direct Vent Heaters, with their whisper-quiet comfort, safety and dependability, are the most popular, best-selling, direct vent heating systems in Alaska. With multiple options to choose from, a Laser Direct Vent Heater can often heat an entire home. It is also the perfect solution for those hard-to-heat room or areas. Laser Heaters are ideal for heating summer homes or cabins, and are certified for installation in mobile homes and manufactured housing. More than half a million satisfied customers trust their home’s heat to TOYOTOMI.
The Laser series large circulation fan distributes heat quickly and evenly in order to maintain and optimize maximum comfort.
* All above models are Wi-Fi compatible except the Laser 60AT.
Advanced heating pipe-within-a-pipe forced flue venting system creates smokeless, odorless, clean heating.
Owner’s manual provides complete, step-by-step instructions that are helpful and easy to understand.
TOYOTOMI Vented Heaters use the following fuels:
Check with your local fuel oil dealer for which of these fuels are available in your area.
|Part Number: L-60AT|
|Type of Heater||Forced Flue Vented Heater (Antique Finish)|
|Fuel Type||ASTM D3699 K1 KEROSENE
ASTM D396 NO.1 LOW SULFUR FUEL OIL
ASTM D975 ULTRA LOW SULFUR HEATING OIL/ DIESEL
|Electric Rating||120V AC 60Hz
Preheat 270 Watts
Buring 60 Watts
|Heating Efficiency||87% (AFUE RATING)|
|Heating Rating||30,000 BTU/hr (high)
21,000 BTU/hr (medium)
12,000 BTU/hr (low)
|Fuel Consumption||0.230 gal/hr (high)
0.161 gal/hr (medium)
0.095 gal/hr (low)
|Size (WxHxD)||30″ x 24″ x 19″|
|Heating Area *||1,250 Sq. Ft. at (0°F)
1,500 Sq. Ft. at (20°F)
|Vent Hole Pipe||2-3/4″ – 3″ diameter|
|Max. Length of
Vent Pipe System
|Maximum 10 ft, 3 bends or less|
|Type of Tank||Exterior Tank (required)|
* 0° F Heat Load = 24 BTU/ft²/hr
20° F Heat Load = 20 BTU/ft²/hr
Room size for which this heater is suitable will vary depending on outside temperature, house insulation, window size and other factors.