Menu
Home / Products / Water Heaters / BS-36UFF TOYOTOMI Water Heater
$0.00
Out of stock
WATER HEATER
BS-36UFF TOYOTOMI
Instantaneous Kerosene Fired Water Heater
Cold showers?
Tepid baths?
Hot water shortages?
The TOYOTOMI BS-36UFF direct vent, sealed combustion water heater solves these problems and provides an end-less supply of hot water. You’ll love its convenience and reliability…and you’ll love your new lifestyle.
| Part Number: BS-36UFF | |
|---|---|
| Type | Combustion Type- Pressure Vapor Flue Pipe- Forced Flue Heating- Instantaneous Source of Water- Direct Connection to Main Supply |
| Ignition | High Voltage Discharge Spark |
| Fuel | ASTM No. 1-K Grade Kerosene or No. 1 Fuel Oil |
| Efficiency | 88%1 |
| Hot Water Output | 148,000 BTU/h |
| Fuel Consumption | 1.1 gal/h |
| Capacity of Heat Exchanger | 5.10 gal |
| Area of Heat Transmission | 9.7 ft2 |
| Fuel system | External tank(2) |
| Dimensions (W x H x D) | 12-5/8″ x 27-3/4″ x 22-1/2″ |
| Weight | 86 lbs. Empty |
| Vent Pipe Hole | 4-3/4 diameter |
| Maximum Length of Vent Pipe System | 10 ft., 3 bends or less |
| Electrical Rating | 120 Volts AC, 60 Hz Ignition-110W Burning- 98W |
| Required Accessories | Fuel strainer, Temp & pressure relief valve |
| Exhaust Air Temperature | less than 5000F |
| Nozzle | Quantity of Vapor 1.1 GPH Spraying Angle 60° |
| Temperature Fuse | 282°F |
| Electric Current Fuse | 5A |
(1) Heat and vaporized water are produced by the combustion process of this water heater. This rating does not take into account heat loss due to condensation of water vapor.
(2) External tank to be purchased from local suppliers.
| Click here for Installation manual (Type A)
Click here for Installation manual (Type B) Click here for Installation manual (Type C) Click here for Operation manual (Type A) |
 |
| Click here for Installation manual (Type A)
Click here for Installation manual (Type B) Click here for Installation manual (Type C) Click here for Operation manual (Type A) |
|
| Part Number: BS-36UFF | |
|---|---|
| Type | Combustion Type- Pressure Vapor Flue Pipe- Forced Flue Heating- Instantaneous Source of Water- Direct Connection to Main Supply |
| Ignition | High Voltage Discharge Spark |
| Fuel | ASTM No. 1-K Grade Kerosene or No. 1 Fuel Oil |
| Efficiency | 88%1 |
| Hot Water Output | 148,000 BTU/h |
| Fuel Consumption | 1.1 gal/h |
| Capacity of Heat Exchanger | 5.10 gal |
| Area of Heat Transmission | 9.7 ft2 |
| Fuel system | External tank(2) |
| Dimensions (W x H x D) | 12-5/8″ x 27-3/4″ x 22-1/2″ |
| Weight | 86 lbs. Empty |
| Vent Pipe Hole | 4-3/4 diameter |
| Maximum Length of Vent Pipe System | 10 ft., 3 bends or less |
| Electrical Rating | 120 Volts AC, 60 Hz Ignition-110W Burning- 98W |
| Required Accessories | Fuel strainer, Temp & pressure relief valve |
| Exhaust Air Temperature | less than 5000F |
| Nozzle | Quantity of Vapor 1.1 GPH Spraying Angle 60° |
| Temperature Fuse | 282°F |
| Electric Current Fuse | 5A |
(1) Heat and vaporized water are produced by the combustion process of this water heater. This rating does not take into account heat loss due to condensation of water vapor.
(2) External tank to be purchased from local suppliers.
Copyright © 2023 Toyotomi USA